Tplinkwifi.net not Working

Many router/modem users are reporting that they are unable to configure or access the TP-Link device. For most (if not all) TP-Link versions, accessing the tplinkwifi.net out of the browser should take you your router/modem settings -- Well, for some reason, this doesn't happen. Most influenced users are reporting the issue persists even after they completed a reset to the modem/router.

What's causing the “tplinkwifi.net not working" error?

We investigated this specific error by looking at various user reports. From what we gathered, there are several common situations that will trigger this particular error message:

A security feature is preventing the direction page from being accessed -- Most TP-Link models include a safety feature that will keep the installation page from being obtained if the router/model wasn't declared for a lengthy period of time. In cases like this, a simple solution is to just restart the unit and try again. In cases like this, the solution would be to re-configure Windows to let automatic IP and DNS assignment.

The Modem/Router is not configured to use tplinkwifi.net as the Setup address -- Some TP-link versions (particularly older models) will not even open the Setup screen if you sort tplinkwifi.net in the browser navigation bar.

Firmware bug -- There are reports that point toward a bug that's preventing TP-Link users from accessing the setup page while connected to the Wi-Fi network. In this case, the remedy is either to disable the wireless component or to upgrade the apparatus to the latest firmware version.

If you are trying hard to get a fix capable of resolving this particular mistake, this report will provide you with various efficient troubleshooting steps. Down below, you will find a choice of methods that other consumers at a similar situation have used to get the issue resolved.

Method 1: Restart your router

If you haven't restarted your router/modem for a long time period, it is very possible that you're prevented from accessing the installation screen due to a security attribute.

Most TP-Link models have a security software that blocks the tplinkwifi.net webpage from being opened if there's absolutely no client logging to the control page for a period of time. Fortunately, the page becomes accessible again after the modem or router is restarted.

Notice: in the event that you determined this was causing the problem however, you find this feature to be bothersome, you can most likely get rid of this safety feature by updating its firmware version to the latest. With the majority of versions, TP-Link chose to get rid of this attribute, so it is possible to eliminate this by downloading the latest version for your specific version. But we just advise you to do this if you're knowledgeable about the process of updating the firmware of a router/model.

If this method was not applicable or you are still encountering this issue, proceed down to the following method below.

Method 2: Accessing the IP address directly

And if yours is, this way is much less reliable as inputting the assigned IP address right on your browser.

If the webpage loads eternally or you also receive some type of error when trying to get tplinkwifi .net, then try obtaining one of the two assigned IP addresses directly:

192.168.1.1

192.168.0.1

Try typing the 2 addresses above in almost any browser, press Input, and see whether any of these property you within the installation menu in your browser.

If the two IP addresses mentioned above end up producing the same effects, move over to another method under.

Method 3: Reinstall router {using|with} Easy Setup Assistant

If you're trying to find a fix that will bypass a whole lot of investigations, the ideal approach to go about solving this challenge is to utilize the Easy Setup Assistant (a TP-Link utility that makes the first setup a whole lot simpler ).

But before you run the utility, then it's very important to verify that your computer will be configured to automatically obtain the IP address automatically. With this method permitted, the installation won't be eager to let the router assign the address into the pc so they can communicate properly.

Notice: Keep in mind that this technique may not be appropriate, because not every TP-Link model is configured to use Easy Setup Assistant.

Method 4: Restart Folder with Wi-Fi handicapped

One solution that several active users've found to be effective is to set up disable the WiFi functionality of the router and access the Setup display while the modem/router is connected through a LAN cable. Here's a Fast guide on how to achieve so:

Look at the rear of your router and press the Wi-Fi button to disable it manually. Each version has a different configuration, but most TP-Link models incorporate a physical button that will allow you to disable the Wi-Fi functionality. Simply press the button and restart your modem or router.

Note: odds are that you will lose the ability to get your router's configurations when Wi-Fi is re-enabled.

Input 192.168.1.1 or 192.168.0.1 inside your browser navigation bar, press Enter, and see whether you're ready to access your router/modem configuration display.

Once you're down with the Setup display of your modem/router, press the wireless button and unplug the LAN cable from the laptop/computer.